19
Some users like to do this so that the file/image is
encoded with the time & date that the images were
originally taken.
To do this, select the Calendar icon in the main menu
to set the date.
How To Use The PhotoPad Pro Software
To get started with the included PhotoPad Pro
software (published by NCH Software), simply follow
the steps below.
1. Download & install the software.
www.ClearClickSoftware.com/PhotoPad7.zip
Go to the link above and download the software.
Open the ZIP file and run the setup file to install
it.
2. Activate the software. Go to:
www.NCHsoftware.com/activation/
Enter your information and the serial number on
the software license card that came with your
To Next Page
Loading...
