EU +44 118 324 1242 | Germany +49 361 7473 4613
www.clearlight-saunas.eu
9
PREMIER IS-1, IS-2 AND IS-3
Assembly Instructions Cont’d
Slide down the bench heater panel by lining up its sides with the vertical guides on the left and right side wall
panel.
1. Be careful not to scratch the side panels when positioning the heater panel.
2. Push the bench heater panel all the way down until it is touching the floor panel and is securely in place.
5 - INSTALLING UNDER BENCH SUPPORT
Vertical bench heater
panel guides are found
on the side panels.
Heater must be
facing outward
To Next Page
Loading...
