Clearlight SANCTUARY - Page 68

69
SANCTUARY C
Assembly Instructions Cont’d
Locate the long under bench support (left side) and shorter under bench support (right side).
1. Install the left long under bench support rst. Slide the bench support down by lining it up with the
vertical guide on the right back wall panel.
2. Install the shorter right side under bench support by sliding it down the vertical guide on the long
bench support that was just installed.
3. Be careful not to scratch the side panels while positioning the heater panel.
4. Make certain that the under bench supports are seated on the oor panel and are securely in place.
5 - INSTALLING UNDER BENCH SUPPORT
Vertical bench heater
panel guides are found
on the side panels.
Heater must be
facing outward