What to do if my Clever Audio 1050035 Speakers have no sound?
If there is no sound from either speaker, ensure that the mains supply is switched on at the wall socket and that the power switch at the amplifier rear panel of the active speaker is on. Also, verify that the volume control is turned up, the audio cables to your audio source are properly connected, and the audio source is active and playing.
Why is there no sound from my Clever Audio 1050035 Speakers passive speaker?
If there is no sound from the passive speaker, check the mini jack cable connection at both the active speaker and the passive speaker end.
General| Brand | Clever Audio |
|---|---|
| Model | 1050035 |
| Category | Speakers |
| Language | English |
Key features of the speaker system, including amplifier power, inputs, wall fixings, and compliance.
Details basic operational aspects such as power switch, volume control, and optional remote control.
Explains the connection methods for the active speaker, including RCA inputs and output for the passive speaker.
Diagram illustrating the rear panel of the passive speaker, showing its ports and connectors.
Diagram illustrating the rear panel of the active speaker, detailing power, audio inputs, and outputs.
Visual guide to the active speaker's volume control panel, including power, volume, and remote switches.
Instructions for connecting the passive speaker using bare wire connectors, up to 10 meters from the amplifier.
Step-by-step guide for connecting and operating the optional remote control cable for volume adjustments.
Provides a troubleshooting guide for common issues, such as lack of sound, with checks to perform.
Lists the technical specifications of the speaker system, including output power, dimensions, and impedance.
To Next Page