How to clean water in Clever Hot Tub?
If the water in your Clever Hot Tub isn't clean, it could be due to several reasons. First, try increasing the filtration time. A dirty filter cartridge can also cause this issue, so clean or replace it. Finally, ensure you are following the chemical manufacturer’s instructions for proper water maintenance.
Why is the heating system not working in my Clever Hot Tub?
If the heating system of your Clever Hot Tub isn't working, start by checking if the temperature is set lower than the current water temperature. If it is, adjust it to a higher setting, between 20-42°C. Also, a dirty filter cartridge or improper water levels could be the cause. Clean or replace the filter cartridge and ensure the water is at the correct level. If these steps don't resolve the issue, it could be due to a heating element failure, requiring professional service.
What to do if filtering system does not operate in Clever Hot Tub?
If the filtering system on your Clever Hot Tub isn't working or you hear a rattling noise when you turn it on, the filter cartridge may be dirty. Try cleaning or replacing it. If that doesn't work, there might be an issue with the power box. If it doesn't reset, call for service. Also, have a professional electrician check whether the household electrical supply is functioning correctly.
How to fix a leak in my Clever Hot Tub?
If your CleverSpa® is leaking, inspect it for tears or punctures. If you find any, use the repair patch provided to seal the leak.
How to use the filtration system, including filter change reminders and operation indicators.
Instructions for using the inflate and bubble jet functions, including auto-stop and reset procedures.
Guide to operating the heating system, including temperature control and automatic circulation.
Steps to set and confirm the desired water temperature within the operational range.
To Next Page
General