H - Plugs (6)
(4 needed + 2 extra)
TAMARACK CHAIR COMPONENTS
SEAT ASSEMBLY
A - Seat (1)
B - Back (1)
C - Thick Slat (2)
D - Thin Slat (10)
E - Connection Rods (2)
Lay Seat (A) at on the ground
with the CleverMade Logo on
the outside of the left leg.
NOTE: Loosen nuts on rod that
holds Seat (A) together with
both Hex Wrenches (I) - one to
secure and one to loosen.
Starting on the left
side, place 1 Thin Slat
(D) slat between each
gap on the Seat (A),
continue until all 10
Thin Slats (D) have
been placed
NOTE: Be sure to align
the top holes of the
slats with the holes on
the Seat (A).
CleverMade logo
F - Endcap Screws (6)
(4 needed + 2 extra)
G - Allen Wrench (2) I - Hex Wrench (2)
1 2
Use provided tools only, power tools could
damage product and make assembly difcult.
B
A
C
H
H
D
To Next Page
Loading...