Clevertouch CM Series - Network Configuration Commands; Network Cloning, Type, and Subnet Settings; DNS Configuration and Retrieval

English - 46 -
NETCLONE
Clone from FTP server

please check network


also be cloned)


Ex:
ftp://user_name:password@
ip_addr/source_path
#* Invalid parameter
or

successfully
or

SETNETWORKTYPE
set network type (eg.
SETNETWORKTYPE
value) (value should

'disabled' as string)

'disabled')
#*Network type is set to: <network-
type>
or
#*wireless connnection is not
supported!
or
#*Network is not supported!
or
#*invalid parameter <network-
type>
GETNETWORKTYPE
get network type (eg.
GETNETWORKTYPE)
no parameter
#*the network type is <network-
type>
SETSUBNETMASK
set subnet mask (subnet
mask value should be of
format nnn.nnn.nnn.nnn)
(eg. SETSUBNETMASK
nnn.nnn.nnn.nnn)

#*set subnet mask: nnn.nnn.nnn.
nnn
or
#*setting subnet mask is failed
GETSUBNETMASK
get subnet mask (eg.
GETSUBNETMASK)
no parameter
#*the subnet mask is nnn.nnn.
nnn.nnn
SETDEFAULTGATEWAY
set default gateway
(default gateway value
should be of format
nnn.nnn.nnn.nnn) (eg.
SETDEFAULTGATEWAY
nnn.nnn.nnn.nnn)

#*set default gateway: nnn.nnn.
nnn.nnn
or
#*setting default gateway is failed
GETDEFAULTGATEWAY
get default gateway (eg.
GETDEFAULTGATEWAY)
no parameter
#*the default gateway is nnn.nnn.
nnn.nnn
SETDNS-
CONFIGURATION


SETDNS
CONFIGURATION mode

string n ('auto' or 'manual')

conf-mode>
or

failed
GETDNS
CONFIGURATION


GETDNS
CONFIGURATION)
no parameter

or

or on error:

unknown
SETDNS1
set DNS server 1 (DNS
server value should be of
format nnn.nnn.nnn.nnn)
(eg. SETDNS1 nnn.nnn.
nnn.nnn)

#*set DNS server 1 to: nnn.nnn.
nnn.nnn
or
#*setting DNS server 1 failed
GETDNS1
get DNS server 1 (eg.
GETDNS1)
no parameter
#*DNS server 1 is nnn.nnn.nnn.
nnn
SETDNS2
set DNS server 2 (DNS
server value should be of
format nnn.nnn.nnn.nnn)
(eg. SETDNS2 nnn.nnn.
nnn.nnn)

#*set DNS server 2 to: nnn.nnn.
nnn.nnn
or
#*setting DNS server 2 failed
GETDNS2
get DNS server 2 (eg.
GETDNS2)
no parameter
#*DNS server 2 is nnn.nnn.nnn.
nnn