Need help?Do you have a question about the Clevertouch CM Series and is the answer not in the manual?
Crucial safety advice for operating the display, covering general precautions.
Precautions for child safety and secure wall installation of the display.
Safe power cord handling and guidance against improper product use.
Proper procedures for using and handling batteries to prevent hazards.
Interpretation of symbols and FCC interference statement.
Identification of the LCD panel and rear side input/output sockets.
Operation of physical controls and connecting the IR receiver.
Detailed description of remote control buttons and their operations.
Steps for correctly installing batteries into the remote.
How to navigate and use the Android interface via the remote.
Customizing the home screen and using the navigation toolbar.
Configuration for network, audio, and screen display options.
Managing apps, permissions, storage, and reset options.
System info, date/time, language, and accessories setup.
Location, security settings, and installing external applications.
Steps for establishing wired LAN and Wi-Fi connections.
Initial setup and overview of Player, Schedule, and Template sections.
Using Media Browser and USB Auto Play for media playback.
Controls for picture quality, volume, and audio output.
Further picture adjustments like dynamic contrast and noise reduction.
Network configuration and signage-specific settings.
Setting OSD orientation and display behavior on no signal.
Restricting use of physical buttons and remote control.
Setting power modes and automatic HDMI source switching.
Performing USB tasks and setting up video wall parameters.
Configuring display language, clock, sources, and CEC functionality.
Setting up automatic media playback from USB.
Steps for establishing wired LAN and Wi-Fi connections.
Wireless streaming and launching installed applications.
Detailed explanation and usage of RS232 HEX commands.
Steps for setting up and testing serial port communication.
Commands for factory settings, keys, reset, and standby mode.
Instructions for standby mode and connection re-establishment.
Commands for video output, time, RTC, and menu timeouts.
Commands for main menu, language, and OSD text printing.
Commands for USB info and scheduler management.
Settings for Wi-Fi access point transmission power.
Cloning network config, setting type, subnet mask, and gateway.
Setting DNS mode and retrieving DNS/network type.
Adjusting OSD, browser, position, dot clock, and phase for VGA.
Commands for auto-positioning and OPS power status.
Setting video wall dimensions, offset, and pixel shift.
Setting signage ID and enabling/disabling video wall.
Managing C2 connections, UART checks, and environmental sensors.
Cropping video and controlling LED bar colors/PWM.
Managing C2 profiles, gyro sensor data, and browser memory limits.
Steps for setting up and testing serial port communication.
Commands for volume, source selection, and monitor power/status.
Commands for screen settings, OSD, and position adjustments.
Commands for clock, color temperature, and contrast settings.
Details on supported video, image, and audio file types.
Lists supported subtitle file extensions and codes.
Details on panel type, audio output, and network connectivity.
Comprehensive list of all available ports and power specifications.
Wireless LAN frequencies, power, and country usage rules.
Compliance statement regarding radio frequency interference.
HDMI/Dolby licenses, included accessories, and disposal guidelines.
General| Brand | Clevertouch |
|---|---|
| Model | CM Series |
| Category | Digital Signage |
| Language | English |
To Next Page
