English - 48 -
GETHPOS Get horizontal position. no parameter
#*The horizontal position is ...
or
#*GETHPOS is available only for
VGA Source.
VPOS Set vertical position.
#*set vertical position to ...
or
#*invalid value entered
or
#*VPOS is available only for VGA
Source.
GETVPOS Get vertical position. no parameter
#*The vertical position is ...
or
#*GETVPOS is available only for
VGA Source.
DOTCLOCK Set dot clock.
#*set dot clock to ...
(percentange in the range)
or
#*invalid value entered
or
#*DOTCLOCK is available only for
VGA Source.
GETDOTCLOCK Get dot clock. no parameter
#*The dot clock is ...
or
#*GETDOTCLOCK is available
only for VGA Source.
PHASE Set phase.
#*set dot clock to ...
(percentange in the range)
or
#*invalid value entered
or
#*PHASE is available only for VGA
Source.
GETPHASE Get phase. no parameter
#*The phase is ...
or
#*GETPHASE is available only for
VGA Source.
AUTOPOS Set auto position no parameter
#*set auto position
or
#*Auto position is available only for
VGA Source.
SETOPSPOWER Set OPS power status
#*Turning OPS on
#*The OPS is already on
#*The OPS is not enabled
#*The OPS is not plugged in
#*invalid value entered
GETOPSPOWER Get OPS power status no parameter
#*The OPS is on
#*The OPS is not enabled
#*The OPS is not plugged in
SETOPSALWAYSON Set OPS Always on value
#*invalid value entered
#*OPS Always on set as true
#*OPS Always on set as false
To Next Page
Loading...