English - 52 -
SEA Send emergency alarm
string-string (alarm url -
emergency message)
[message content should be
#Emergency Alarm is set !!!
STEA Stop emergency alarm none #Emergency Alarm is stopped !!!
UNP Send Message
string-int (message text - 0)
[message content should be
#Message Sent in SUCCESS !!!
TN
Send Message/Trigger
int (key id (900<= id<=904)) #Message Sent in SUCCESS !!!
DBOOTC Disable Bootcaster none
#BOOTCASTER_DISABLED in
SUCCESS !!!
EBOOTC Enable Bootcaster none
#BOOTCASTER_ENABLED in
SUCCESS !!!
DDHCPC Disable Dhcp client none
#DHCPC_DISABLED in
SUCCESS !!!
EDHCPC Enable Dhcp client none
#DHCPC_ENABLED in SUCCESS
!!!
RTVP Return TV Main Page none #Refresh Done in SUCCESS !!!
GTSURL Get TV Portal URL none #StartUp url is ....
SFTI
Set First Time Installation
by taking and saving
system language
and txt language text
parameters; then reboots
the system.
string-string
[system language (look at
abbreviations) - txt language
text (look at txt languages)]
#System reinitialised !!!
SDFTI
Set Default First Time
Installation by reseting
the parameters set by
SFTI and returning to
default FTI settings; then
reboots the system.
none #System will be reinitialised !!!
SHM Set Hotel Mode
int ( 1-enabled/ 2-
disabled)
#Hotel Mode is enabled/disabled
UNTP Update Date and Time none
#Internet connection successful
#Date and Time is being updated
from NTP Client
or
#No Internet Connection! Date and
Time cannot be updated
SNTP Set NTP Server IP
path - 0 )
deleted - SUCCESS !! or#Forced_
ntpserver written - SUCCESS !!
WAU SW Auto Upgrade int ( 1-enabled/ 2- disabled)
#Auto Software Update Availability
- ENABLED !!
SRC
Set Remote Control
Code
int (2/3/4)
#Remote Control system Code
set to ...
GTNTP Get NTP Server IP none
To Next Page
Loading...
