9. Glue on the 4 carbon rods on the front of the fuselage. Before the
glue solidifies, make sure that the horizontal and vertical parts of the
fuselage are vertical.
10. Install four rudder horns and push rod fixing plates, and the
position of the push rod fixing plate is determined according to the
length of the selected servo rocker arm.
11. Install electrical equipment such as motor, servo,ESC and receiver.
Special note: this aircraft is suitable for players who have fixed wing flight foundation. Electrical
installation debugging and flight technology are not within the scope of this description. Please
learn by yourself or consult professionals.
To Previous Page
Loading...