38
- Avoid open flames or any source of combustion.
- Ensure that the room in which the appliance is installed is well
ventilated.
It is dangerous to change the specification of the appliance in any
way whatsoever.
Damage to the power cable may cause a short circuit and/or
electric shock.
Electrical safety
•
We decline any liability in respect of incidents caused by poor
electrical installation.
•
Do not extend the power cable. Do not use an extension cable, or
adapter, or multi-way socket.
•
Check that the wall socket is not damaged. A wall socket in poor
condition may cause the appliance to overheat and explode.
•
Check that the wall socket used for the appliance is properly
accessible.
•
Never pull on the main power cable.
•
Ensure that the appliance is always electrically earthed.
•
If the wall socket is loose, do not connect the cable, as there is a
risk of electric shock or fire.
•
Do not use the appliance if the interior lighting cover is not
installed.
•
Disconnect the appliance before replacing the lighting bulb.
•
The appliance operates on a single phase 220~240 V / 50 Hz
power supply. The appliance must be connected to an earthed wall
socket, in accordance with applicable recommendations.
•
Do not attempt to replace a damaged power cable, contact your
after-sales service.
•
The power socket must be easily accessible but out of reach of
To Next Page
Loading...
Need help?
General
