55
order to avoid any risk of injury.
IF THESE CHECKS REVEAL NOTHING, THEN CONTACT YOUR RETAILER’S AFTER-SALES DEPARTMENT.
CAUTION!
Unplug the appliance before carrying out any maintenance or
repair work.
8. TROUBLE SHOOTING
You can solve many common air conditioner problems easily, saving you the cost of a possible service call.
Try the suggestions below to see if you can solve the problem before calling the servicer.
• Not plugged in
• The appliance is turned off
• The circuit breaker tripped or a blown fuse
• Timer (« TIMER » mode) hasn’t been
corrected set
• Water full alarm is on
Cooling function (« COOL » mode) of the
appliance is not efficient
• Check if nothing is blocking air inlet/outlet
• Make sure that there is no heat source in the
room
• Strainers are too dirty and covered by dust
• Set temperature is not appropriate
• Fan speed set in not the correct one
Appliance seems to make too much noise
• Make sure that you have correctly removed all
packing material
• Make sure that the air conditioner is stable
and level
• Make sure that the surface on which your
appliance is perfectly flat
• The air conditioner is in water full
NOTE: all pictures in the manual are for explanation only. The actual shape of the device you purchased
may be slightly different, but the operations and functions are the same.
To Next Page
Loading...
Need help?
General
