29
3. TECHNICAL DATA
Below is an example of the nameplate:
The nameplate attached to the inside or rear of the appliance (depending on the model) includes the entire
information specific to your appliance.
We recommend that you make a note of its serial number in this booklet prior to installation, so that you
can refer to it later (technical work, request for assistance, etc.).
CAUTION: no assistance can be provided without this information.
4. INSTALLATION INSTRUCTIONS
Select mounted place
Always place and use the appliance on a dry, level, flat and level surface. Leave at least 50 cm of
clearance behind and on both sides of the appliance and leave at least 50 cm of free space above the
appliance before connection of exhaust pipe.
To Next Page
Loading...
Need help?
General
