Climadiff CLIMA24R - Page 32

32
N°
FUNCTION
USE
1
Remote connection
Remote control reception window.
2
ON/OFF
Press the key to turn on and turn off the machine. In the case of power on,
press the key to turn off the machine; in the case of power off, press the key
to turn on the machine.
3
Mode
In the case of power on, press the key to switch between cool, dry, fan or
heat mode.
4
Temperature -
Press the “+” and “-“ keys to change the set temperature or timing set value.
While setting temperature, press “+” key or “-“ key to select the required
temperature (not available in dry and fan mode).
5
Display
Display of various icons related to the selected mode, temperature, timer,
etc.
6
Temperature +
Press the “+” and “-“ keys to change the set temperature or timing set value.
While setting temperature, press “+” key or “-“ key to select the required
temperature (not available in dry and fan mode).
7
Fan speed
In cooling and fan mode, press the key to select high, medium or low wind
speed operation.
In heating mode, press the key to select high, medium and low wind speed
operation. But limited by anti-cold conditions, under certain conditions, it
may not run according to the set wind speed.
In dehumidification mode, pressing the key is invalid and the fan will forcibly
choose low wind speed operation.
8
Timer
In the case of power on, press the key to close timing; in the case of power
off, press the key to open timing. Press the key, when the timing symbol
flashes, press “+” and “-“ key to select the required timing value. Timing
values can be set within 1-24 hours and the timing value is adjusted
upwards or downwards by one hour.