Climate Wizard CW-H Series User Manual (English)

Other manuals for Climate Wizard CW-H Series

Questions and Answers:

Mary StevensAug 16, 2025

What to do if my Climate Wizard CW-H fan fails to start?

N
Nancy ObrienAug 17, 2025
If your Climate Wizard Air Conditioner fan isn't starting, check the main power circuit breaker or fuse, and reset or replace if necessary. Burnt out fan motor should be replaced. Low system voltage may require consulting with your power supply authority. If the wall or remote control is in AUTO or AUTO TIMER mode and no fan bars are displayed the fan will not start, so switch to MANUAL mode to check the fan operation. You may need to replace wall control. Also, check fault condition via the tri-colour LED on electronic module, rectify fault as indicated and restart the cooler.

Jennifer OlsonAug 20, 2025

Why is my Climate Wizard CW-H so noisy?

M
Michelle MyersAug 20, 2025
A noisy Climate Wizard Air Conditioner could be caused by a fan that's out of balance due to dirt, so clean the fan. Alternatively, the air distribution system might be creating too much back pressure, or changes of direction too sudden, or grilles too small, in which case you should have contractor re-evaluate his design; use bends instead of elbows; change grille sizes.

Climate Wizard CW-H Series Specifications

General

Model	CW-H Series
Dimensions (H x W x D)	Varies by model. Consult specific model documentation.
Weight	Varies by model. Consult specific model documentation.
Cooling Capacity	Varies by model. Consult specific model documentation.
Operating Temperature (Cooling)	Varies by model. Consult specific model documentation.
Sound Pressure Level (Indoor)	Varies by model. Consult specific model documentation.
Sound Pressure Level (Outdoor)	Varies by model. Consult specific model documentation.