Climatisation RC4 - Adjusting Switch-Off Time

5
ADJUSTMENT OF THE SWITCH-OFF TIME
After selecting a programming function (T1, T2 or WKT1, WKT2),
proceed as follows to adjust the programmed switch-off time.
EXAMPLE: Air conditioner switch-off at 18:30 (6:30 p.m.)
1 Press the SET key
The ON (switch-on) icon and the switch-on time flash.
2 Press the CLEAR key.
1. The programmed switch-on is no longer displayed.
2. The “OFF” (Switch-off) icon and the switch-off time flash.
3 Adjust the hour and minutes.
1. Set the switch-off time to 18:30 (6:30 p.m.)
2. Press the HOUR + key to increase the time or the HOUR - key to
decrease it.
4 Press the SET key.
1. The switch-off time is programmed for 18:30 (6:30 p.m.) (the
“OFF” icon of the programming function comes on steadily).
REMARKS:REMARKS:
REMARKS:REMARKS:
REMARKS:
1. The implicit settings of the programming functions are 7:00 and
18:00 (7 a.m. and 6 p.m.) for the switch-on and switch-off times.
2. The programming mode will always display the last switch-on and
switch-off settings on the LCD display.