Need help?Do you have a question about the Climax Hybrid-Panel Series and is the answer not in the manual?
Details the functional and electrical specifications of the system.
Identifies all the numbered parts of the control panel's exterior and interior.
Explains the methods for powering the control panel.
Provides guidelines for choosing the best location to mount the panel.
Details the step-by-step process for physically mounting the control panel.
Covers the essential steps for installing the panel's hardware components.
Guides on how to download and install the necessary software for the panel.
Describes the process of adding new accessory devices to the system.
Outlines the procedure for testing sensor operation range.
Allows configuration of siren and sound settings for the system.
Configures wired sensors, zone wiring, and EOL resistance.
Displays current panel status and device information.
Enables programming of panel, time, and sound settings.
Manages user PIN codes for remote system control.
Configures GSM settings for GPRS, MMS, and SMS functionalities.
Manages IP address settings and network configurations.
Sets up the panel's Wi-Fi connection.
Sets up the administrator login name and password for the system.
Configures rules for controlling sensors and home appliances.
Explains how to clear parameters and reset the panel to factory defaults.
Allows backing up and restoring programmed parameters and settings.
Stores captured pictures and videos from cameras when triggered.
Logs triggered events with CID event codes and report status.
Records specific actions performed by the panel and its devices.
Describes various fault events that can occur in the system.
Details system responses to alarms based on mode and event attributes.
Sets up cross verification for intrusion sensors to reduce false alarms.
Lists and describes the meaning of various event codes used by the system.
To Next Page
General