Clint ODIN Firmware Update

21
DOWNLOAD FIRMWARE INSTALLING FIRMWARE
1. Go to www.clintdigital.com and
download the newest rmware available
for ODIN.
2. When download is complete
copy and paste ODIN.fw from your
download folder over to an empty USB
memory stick.
3. While the le is being copied,
power on ODIN by pressing the PLAY/
PAUSE button.
4. When ODIN is fully booted up
(usually after 15-20 secs.), insert the
USB stick into the USB port on ODIN.
5. Press and hold the “Volume +” and
“Mute” simultaneously for 4 secs.
6. Release buttons and wait. Watch
the LED’s carefully and do not turn off
power or disconnect USB memory stick
during update process.
7. All ve LED will blink every second
indicating update process is ongoing.
8. When the update is nished ODIN
will reboot (the four white LED’s will
ash rapidly).
Hold for 4 sec.
Insert USB memory
stick here.
All LEDs will ash
This quick guide explains how to upgrade the
rmware (software) of your ODIN speaker
This quick guide explains how to upgrade the
rmware (software) of your ODIN speaker

Clint ODIN Specifications

General

Speaker type	-
Number of drivers	2
Number of speakers	1
Audio output channels	2.0 channels
Amplifier class	D
Impedance	- Ω
Frequency range	- Hz
RMS rated power	50 W
AUX in	Yes
Bluetooth	No
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Connectivity technology	Wired & Wireless
Product type	Stereo portable speaker
Product color	Gray
Recommended usage	Universal
Audio formats supported	AAC, AAC+, AIFF, FLAC, MP3, OGG, WAV, WMA
Power source type	AC
AC adapter input voltage	100 - 240 V
Power consumption (standby)	0.5 W
MP3 bit rates	- Kbit/s
Package weight	8190 g
Quantity per pack	1 pc(s)

Weight and Dimensions

Width	350 mm
Height	570 mm
Weight	6780 g