Need help?Do you have a question about the CLIVET MV6R-XMi and is the answer not in the manual?
Explains warning, caution, note, and information labels used in the manual.
General advice for installation operators.
Guidelines for selecting a suitable installation location.
Safety precautions related to refrigerant handling.
Electrical safety and installation precautions.
Introduces unpacking and handling procedures for the outdoor unit.
Step-by-step guide for unboxing the outdoor unit safely.
Lists and describes the accessories included with the outdoor unit.
Details pipe connection ports and sizes for different HP models.
Instructions on removing protective boards to maintain unit capacity.
Outlines topics on branch joints and unit combinations.
Lists available branch joint assemblies for indoor and outdoor units.
Table showing recommended combinations of outdoor units and indoor units.
Introduces precautions before unit installation.
Details site requirements for optimal unit placement and ventilation.
Requirements for clean, dry, and sealed refrigerant piping using R410A.
Design considerations for piping, including MS boxes and unit combinations.
Details electrical compliance standards and user responsibilities.
Requirements for selecting wire diameters and safety devices.
Lists the topics covered in the outdoor unit installation chapter.
Instructions on how to open the outdoor unit and its electric control box.
Instructions for preparing a solid, level base for unit installation.
Key considerations and precautions for refrigerant piping welding.
Safety and procedural notes for connecting refrigerant piping.
Safety warnings and requirements for electrical wiring.
Explains wiring modes for outdoor unit and indoor unit communication.
Steps for securely fixing the power cord to the unit.
Overview of system configuration and field settings.
Explains the function of various dial switches for system configuration.
Explains the information displayed on DSP1 and DSP2.
Guide to navigating and using the menu mode for system settings.
Introduces the steps for performing a test run after installation.
Important precautions to observe during the test run.
A checklist of items to verify before starting the test run.
Outlines the topics covered in maintenance and repair.
Essential safety measures before performing maintenance.
Provides the physical dimensions of the outdoor units.
Explains warning, caution, note, and information labels used in the manual.
Details the operational temperature and humidity ranges for the unit.
Explains how the system operates with different unit combinations.
Explains the dry program's function for reducing humidity.
Steps to start and stop the dry program.
Maintenance steps for units shut down for extended periods.
Maintenance procedures before shutting down the unit for long periods.
Details about the refrigerant type, GWP, and leak checks.
Information on warranty period and recommended maintenance.
Lists and defines common error codes displayed by the unit.
To Next Page
General
