Need help?Do you have a question about the CLIVET WiSAN-YSE1 35.2 and is the answer not in the manual?
Highlights potential hazards and the need for caution.
Specifies the unit's approved applications and limitations.
Covers positioning, hydraulic, electrical, and ducting requirements.
Emphasizes periodic inspection to avoid repair costs.
Advises disabling the unit and contacting a service agent.
Instructs immediate unit disablement and use of original spares.
Guides on collecting unit data for support requests.
Emphasizes safety procedures and protective equipment for handling.
Addresses placement criteria like flooding, level ground, and anchoring.
Details water quality parameters and potential issues with inadequate quality.
Advises on preventing freezing via glycol, heating cables, or draining.
Details installation, mesh requirements, and cautions against removal.
Step-by-step guide for starting the unit pump and system.
Guides on referring to diagrams, verifying supply, and ensuring safety.
Details voltage, phase balance, and earth cable specifications.
Explains remote control via S5_3 and wired controllers.
Details customer connections for REMAUX control board.
Explains function and usage of backup heaters for heating and DHW.
Explains wiring and installation of the remote keypad.
Details components and sequence for DHW production.
Lists checks for unit installation and power supply readiness.
Covers checking circuit pressure, oil stains, and valve status.
Guides on grounding, conductor tightening, and voltage checks.
Explains how to set operating modes and temperature setpoints.
Details alarm codes, their meanings, and unit protection modes.
Emphasizes safety checks and controlled procedures to reduce risks.
Covers monitoring for flammable refrigerants and prohibiting ignition sources.
Discusses acceptable methods and precautions for leak detection.
Details procedures for refrigerant removal, evacuation, and charging.
Provides guidance on safe refrigerant recovery during dismantling.
Reiterates safety precautions and protective gear for maintenance.
Warns to read safety warnings before disconnecting and recovering refrigerant.
Highlights hazards from electrical components and moving parts.
Covers system management by the master unit and thermoregulation.
Lists protocol, speed, data bits, parity, and stop bits.
To Next Page
General