Need help?Do you have a question about the CLIVET WSAN-XSC 432 and is the answer not in the manual?
Importance of the serial number for unique identification and tracing.
Further safety measures and risk reduction strategies to be observed.
Identifies danger zones and risks associated with unit handling.
Covers general hazards, electrical system risks, and safe practices.
Step-by-step instructions for safely connecting the unit to the power supply.
Overview of the modular system composition and available modules.
Essential checks before initiating the start-up sequence.
Verifying aeraulic, refrigerant, water, and electrical systems.
Checking tensions, absorptions, flow rates, and refrigerant parameters.
How the unit regulates temperature and compensates set-points.
Navigating the parameter menus for configuration.
Procedures for identifying, analyzing, and resetting alarms.
Lists of alarms for central, compressor, pump, and evaporator modules.
Instructions for cleaning the fresh air heat exchanger fins.
Tables for detecting circuit operation parameters.
Data for R410A refrigerant pressure and temperature relationships.
Causes and solutions for high/low pressure conditions.
Performance metrics like capacity, EER, COP, and power input.
To Next Page
General
