Need help?Do you have a question about the CLIVET WSAN-XSC3 90.4 and is the answer not in the manual?
General| Model | WSAN-XSC3 90.4 |
|---|---|
| Category | Heat Pump |
| Cooling Capacity | 90.4 kW |
| Power Supply | 400V / 3Ph / 50Hz |
| Refrigerant | R410A |
Provides unit installation, use, and maintenance guidance.
Discusses potential hazards and the need for qualified personnel.
Covers outdoor installation requirements and safety.
Advises on planning periodic inspections to reduce costs.
Instructions for handling unit breakdown or malfunction.
Installer must train the user on operation and maintenance.
Explains how to identify the unit using its serial number label.
Advise to observe external packaging instructions for storage.
Step-by-step guide for handling and lifting the unit safely.
Instructions on how to remove packaging safely.
Defines functional spaces for unit operation and maintenance.
Criteria for choosing the installation place for the unit.
Explains condensate water generation and disposal.
Details required water quality parameters and potential issues.
Measures to prevent freezing of water connections.
Instructions for performing hydraulic connections.
Function and installation of the flow switch.
Step-by-step sequence for operating the hydraulic circuit.
Information from the serial number label regarding electrical data.
Steps for making electrical connections correctly.
Steps for connecting and configuring a PC to the unit.
Information on Modbus/RS485 communication.
Overview of start-up operations and required conditions.
List of checks before unit power supply for start-up.
Step-by-step sequence for unit start-up after power supply.
Verification of electrical connections and voltage.
How to set the electric power limit via external signal.
Settings for temperature correction based on climate.
Explanation of the control panel display variables.
Description of the control panel keys and their functions.
Steps to change the unit's operating state (OFF, ECO, ON, Pump On).
Steps to modify the unit's setpoint values.
How to set weekly operating events (Off, Eco, On, Recirculating).
Procedures for identifying, resetting, and managing alarms.
Overview of maintenance importance and safety checks.
Recommended inspection frequency and tasks.
How to clean the air coil safely.
How to clean the water side exchanger.
Steps for system discharge and safe handling of liquids.
Visual guide for compressor replacement procedure.
Table listing anti-vibration mount supports by code and dimensions.
Diagrams and components of the HydroPack system.
Diagrams for hydronic assembly with storage tanks.
Procedures for safely disconnecting the unit.
Guidelines for unit dismantling and material disposal.
Performance data for cooling capacity, power input, and EER.
Performance data for heating capacity, power input, and COP.
Details on compressor types, refrigerant, and oil/refrigerant charge.
Sound power and pressure levels for different unit sizes.
Physical dimensions and installation clearances for unit models.
Dimensions for shipping unit models.
To Next Page
