If TYPE TEMP = AMBIENT TEMP. , the following
pages are displayed:
Use the AMBIENT THERMOSTAT.
1 - AMBIENT THERMOSTAT = NO.
Press LEFT and UP on the home page, the black cursor
appears.
Press ON-OFF, the following page is displayed:
2 - AMBIENT THERMOSTAT = TWO ZONES
The ambient thermostat for the fan coil unit is deactivated, the
ambient thermostat for underfloor heating is active and the
unit is in operation, but the display is off.
The following page is displayed:
Use the interface to activate / deactivate the unit for the DHS.
Press RIGHT and DOWN on the home page, the black cursor
appears:
When the cursor is on the DHW mode temperature, press ON
-OFF to activate / deactivate it.
If the ambient operation mode is activated (ON), the following
pages are displayed:
To Next Page
Loading...
