❑ The image does not change
•
If the unit enter the freeze mode or playback mode, the image
may not change
•
Restart the unit
•
Hardware Reset
❑ Smudges or blemishes on the screen
•
Adjust brightness
•
Clean the LCD screen and camera
❑ Image is out of focus
•
Check if the auto focus is disabled
•
move your hand back and forth over the document you are
viewing to trigger the focus
•
Tap on the screen for 2 seconds to trigger the focus manually
❑ Other problems
•
Restore to factory defaults in the menu
•
Hardware Reset
Please contact your local distributor if the problem is not solved.
To Next Page