Connect an external camera to the unit which will show the image
that the camera captures. The internal distance camera will be
bypassed.
When the unit is hung or can’t be turned off normally, press the
Power! and Voice Up Button! and Voice Down Button at
the same time to trigger the hardware reset.
❑ The unit does not turn on
•
Connect to the power adapter
•
Charge the battery
•
Hardware Reset
❑ Black screen or White screen
•
If the unit is sitting on a flat pure surface or there is nothing on
the tray, the screen may be black or white.
•
Adjust the magnification
•
Adjust the color mode
•
Restart the unit
•
Hardware Reset
To Next Page