Need help?Do you have a question about the CM Labs motor mix and is the answer not in the manual?
General| Connectivity | USB |
|---|---|
| Dimensions | 13.4 x 14.2 x 3.1 inches (340 x 360 x 78 mm) |
| Weight | 9.5 lbs (4.3 kg) |
| EQ | Software Dependent |
| Aux Sends | Software Dependent |
| Motorized faders | Yes |
Step-by-step instructions for connecting and configuring the MotorMix with Pro Tools.
Guidance on running the built-in self-test and identifying issues with MotorMix.
Contact details for Digidesign technical support for Pro Tools related issues.
Explains how to use MotorMix faders, pots, and selectors within Pro Tools.
Details the functions of switches located to the left of the faders for Pro Tools.
Details the functions of switches located to the right of the faders for Pro Tools.
Information on linking multiple MotorMix units for expanded channel control and custom console configurations.
Outlines hardware, connections, and software needed for standard operation.
Guidance on resolving issues during standard use of the MotorMix, including self-test.
Contact information for support related to standard operations and non-Pro Tools software.
Detailed explanation of faders, rotary pots, and the rotary selector.
Covers plug-in parameters, view controls, multi controls, and burn buttons in standard mode.
Explains solo, mute, and other function switches for standard operations.
Lists the detailed hardware specifications, features, and dimensions of the MotorMix.
Visual diagram and explanation of the MotorMix control surface layout and key assignments.
Details the ports, power switch, contrast control, and other rear panel features.
To Next Page