CMC S15 MY2023 - User Manual

To Next Page

lingua italiana

S15 MY2023

FULL HYDRAULIC

Operation and

maintenance manual

Ed. 00 - 02-2024

Main Page

Table of Contents3
General and Safety Information5
Foreword5
Purpose of the Manual5
Manufacturer and Machine Identification6
Glossary of the Terms6
Procedure to Request Technical Assistance7
Attached Documentation7
General Safety Conditions7
Safety Conditions before Use8
Conditions for Safe Use9
- Safety - Operator Training9
- Safety - Personal Protective Equipment for Operators (PPE)9
- Safety - Environmental Conditions9
- Safety - Checking the Safety Systems10
- Safety - Work Area10
- Safety - Stabilisation Phase11
- Safety - Use Phase11
- Safety - End of Use12
Safety Conditions for Adjustments and Maintenance Operations13
Safety Warnings for Environmental Impact15
General Machine Description16
Description of the Main Components18
Basket Description20
Reasonably Foreseeable Wrong Use22
Residual Risks23
Guards and Safety Devices24
Position of Safety and Information Signals (Left Side)26
Position of Safety and Information Signals (Right Side)28
Description of the Safety and Information Signals30
Technical Data of Machine32
Technical Data of Honda Engine34
Technical Data of Kubota Engine34
Electric Motor Technical Data35
Max. Reactions at Ground with Max36
Operating Diagram37
Admitted Slopes38
Areas of Danger39
Safety Distance from Power Supply Lines39
Wind Speed40
Life Limits41
Recommendations on Operation and Use41
Controls Combined with the Installed Endothermic Engine41
Endothermic Engine Controls Honda42
Endothermic Engine Controls Kubota44
Control Console46
Outrigger Controls48
Basket Controls50
Emergency Controls52
Warning Indicator Light54
Endothermic Engine Start-Up and Stop Honda56
- Start-Up56
Endothermic Engine Start-Up and Stop Kubota57
- Start-Up57
Electric Motor Start-Up and Stop58
- Start-Up58
- Stop58
Emergency Stop and New Start-Up59
Equipment Travelling (on Site)60
Spacing of Track Axis Distance61
- Widening of Track Axis Distance61
- Narrowing of Track Axis Distance61
Stabilisation and Retraction of Outriggers (Standard)62
- Stabilization62
- Outriggers Retraction63
Stabilization and Retraction of Outriggers (Automatic)64
- Stabilization64
- Outriggers Retraction65
Basket Lifting and Retraction66
- Basket Lifting66
- Basket Retraction67
Basket Disassembly and Assembly68
- Basket Disassembly68
- Basket Assembly69
Loading and Unloading for Transport70
- Embankment Ramp70
- Lifting Device70
- Ramp for Means of Transport71
Equipment Lifting72
Emergency Operations73
Basket Recovery by the Ground-Level Operator74
Basket Recovery Due to the Failure of the Hydraulic System75
Basket Recovery Due to the Failure of the Electric System76
Hydraulic and Electric System Damaged77
Basket Recovery with Manual Pump78
Retraction of Outriggers with Manual Pump79
Equipment Transfer with Manual Pump80
Basket Recovery with Electric Pump82
Retraction of Outriggers with Electric Pump83
Equipment Transfer with Electric Pump84
Engine Start-Up with Emergency Battery86
Refuelling88
Stop in Case of Prolonged Inactivity89
Restarting the Machine after a89
Recommendations for Maintenance90
Scheduled Maintenance Intervals90
Lubrication Point Diagram94
Lubricants and Hydraulic Oil95
Tightening Torque95
Cleaning and Washing96
Check of Safety Devices96
Oil Tank Air Removal Mode100
Check of Hydraulic System Oil Level101
Change of Hydraulic System Oil Filters102
Change of Hydraulic System Oil104
Problems, Causes, Remedies105
Fuse Change108
Disposal and Scrapping109

Need help?

Do you have a question about the CMC S15 MY2023 and is the answer not in the manual?

CMC S15 MY2023 Specifications

General

Brand	CMC
Model	S15 MY2023
Category	Boom Lifts
Language	English

Related product manuals

CMC S15 MY2023 - User Manual

Table of Contents

CMC S15 MY2023 Specifications

Related product manuals