Need help?Do you have a question about the CME Medical T34 and is the answer not in the manual?
Overview of the T34 as a small, lightweight, robust, battery powered infusion pump.
Details the three modes of operation: Lock on, Lock off, and Rate mode.
Specifies the T34 syringe pump's intended use for medication and fluid delivery.
Lists contraindications for using the T34 syringe pump.
Guidance on understanding the manual, warnings, notes, and specifications.
Explanation of WARNING and NOTE indicators used throughout the manual.
Precautions for operating the T34 syringe pump, including FCC rules and general handling.
Precautions related to drug selection, monitoring, and alarm settings during infusion.
General warnings about handling, cleaning, and proximity to electrical equipment.
Explains the meaning of various symbols used on the T34 syringe pump.
Instructions for inspecting and unpacking the T34 syringe pump and accessories.
Details about the lockbox, its material, and compatibility with syringes and sets.
Information on optional disposable and re-usable carry pouches.
Overview of the BodyComm PC software for pump programming and data management.
Information on battery types, fitting, and potential impact of rechargeable batteries.
Identifies and describes the key components and buttons of the T34 syringe pump.
Explains the two levels of healthcare provider access code protection for setup.
Details how to activate and deactivate the keypad lock feature for security.
How to view the event log, which records pump status and events.
Explains the feature that reverses the motor during an occlusion.
Lists default syringe brands and sizes compatible with the T34 pump.
Information on using administration sets with the T34 pump, recommending proprietary sets.
Step-by-step instructions for inserting the battery into the pump.
Information on battery life, alerts, and how to view the battery meter.
Instructions for powering the pump on, pausing, stopping, and turning it off.
Describes options available within the pump's Info Menu.
Overview of pump configuration via Change Set Up, Rate Setting, and BodyComm software.
Details the pre-loading sequence, programme protection, and resume function.
Step-by-step guide for loading, detecting, and confirming the syringe.
Examples of screen sequences for Lock ON, Lock OFF (duration/rate) modes.
How to change the infusion rate during operation (titration).
Guidance on performing regular safety checks during an infusion.
Information on alert conditions, alarm causes, and initial troubleshooting steps.
Explanation of the Keep Vein Open (KVO) function at the end of an infusion.
Instructions on how to use the purge function to remove system slack.
Procedures for cleaning the T34 syringe pump, including warnings.
Recommendations for cleaning the lockbox and substances to avoid.
Instructions for cleaning fabric pouches.
Guidelines for storing the pump for extended periods.
Information on who should perform servicing and repairs on the pump.
Advice on environmentally responsible disposal of the pump and accessories.
Step-by-step guide for priming and loading a syringe in Lock ON mode.
Guide for priming and loading a syringe in Lock ON mode with purge function.
Procedure for loading and priming a syringe in Lock ON mode.
Step-by-step guide for priming and loading a syringe in Lock OFF mode.
Procedure for loading and priming a syringe in Lock OFF mode.
Guide for Lock OFF mode with titration limits and rate change during infusion.
Instructions for operating the T34 pump in Rate Mode.
Guide for Rate Mode with titration limits and rate change during infusion.
How to change pump configuration settings like time, date, and program lock.
Procedure to change the Program Lock setting from fixed duration to change duration.
Detailed technical specifications of the T34 syringe pump.
Information regarding the warranty period and terms for the T34 syringe pump.
Contact details for CME Medical for general enquiries, quality, sales, and support.
Alphabetical index of topics covered in the manual with corresponding page numbers.
General| Manufacturer | CME Medical |
|---|---|
| Model | T34 |
| Type | Ambulatory Syringe Pump |
| Usage | Infusion therapy |
| Flow Rate Range | 0.1ml/hr to 300ml/hr |
| Syringe Sizes | 5ml, 10ml, 20ml, 30ml, 50ml |
| Occlusion Pressure | Low, Medium, High |
| Delivery Modes | Continuous, PCA |
| Bolus | Programmable |
| Alarms | Occlusion |
| Syringe Capacity | 5 ml to 50 ml |
| Infusion Modes | Continuous, PCA |
| Protection | Lockable keypad |
To Next Page
