5/38
sending messages, the indicator light of the corresponding port will
flash rapidly.
5-pins DIN MIDI input 1 and 2 ports and indicators
- These two MIDI IN ports are used to connect to the MIDI OUT or MIDI
THRU port of a standard MIDI device and receive MIDI messages.
- The green indicator light will stay on when the power is on. When
receiving Messages, the indicator light of the corresponding port will
flash rapidly.
USB-A (Up to 8x) host port and indicator
The USB-A host port is used to connect standard USB MIDI devices
that are plug-and-play (USB class compliant). Supports up to 8-in-8-out
from the USB host port through a USB hub (if the connected device has
multiple USB virtual ports, it is calculated based on the number of ports).
The USB-A port can distribute power from the DC or USB-C port to the
connected USB devices, with a maximum current limit of 5V-1A. The USB
host port of H4MIDI WC can be used as a stand-alone interface without a
computer.
Please note: When connecting multiple USB devices through a non-
powered USB hub, please use a high-quality USB adapter, USB cable and DC
power supply adapter to power the H4MIDI WC, Otherwise, the device may
malfunction due to unstable power supply.
Please note: If the total current of USB devices connected to the USB-A
host port exceeds 1A, please use a self-powered USB hub to power the connected
USB devices.
To Next Page
Loading...
