9/38
the plug, a negative terminal on the inner pin, and an outer diameter of 5.5 mm.
WIDI (Option) button, Internal expansion slots, Bluetooth MIDI
indicator
A. Button and internal expansion slots
This button has no effect when the optional WIDI Core Bluetooth MIDI
module is not installed.
H4MIDI WC can be equipped with CME's WIDI Core module to
expand the 16-channel bi-directional wireless Bluetooth MIDI function. For
installation instructions of the WIDI Core module, please refer to the printed
installation guide in the package. For technical specifications, please visit the
product page www.cme-pro.com/widi-core/. This module must be
purchased separately.
Whit the optional WIDI Core Bluetooth MIDI module installed, this
button can perform specific shortcut actions. First, please make sure that the
WIDI Core firmware has been upgraded to the latest version. The following
operations are based on WIDI BLE firmware version v0.2.2.1 or higher:
- When the H4MIDI WC is not powered on, press and hold the button
and then power on the H4MIDI WC until the WIDI (Optional) indicator
in the center of the interface flashes slowly 3 times, then release it.
The WIDI Core Bluetooth module will be manually reset to the factory
state.
- When H4MIDI WC is powered on, press and hold the button for 3
seconds and then release it, and the Bluetooth role of the WIDI Core
module will be manually set to "Force Peripheral" mode (this mode is
To Next Page
Loading...
