- When used as a standalone MIDI router, mapper and filter, connect the
interface to a standard USB charger or power bank via the matching
USB cable and started to use.
Note: Please choose a power bank with Low Current Charging mode (for
Bluetooth earbuds or smart bracelets, etc.) and does not have an automatic power-
saving function.
- When the USB-C port receives Messages, the USB-C INPUT green
indicator will flash accordingly.
- When the USB-C port has MIDI messages sent, the USB-C OUTPUT
green indicator will flash accordingly.
DC 9V power socket
You can connect a 9V-1A DC power adapter to power the H4MIDI WC.
This is designed for the convenience of guitarists, allowing the interface to
be powered by the pedalboard power source, or when the interface is used
as a standalone device, such as a MIDI router, where the power source
other than USB is more convenient. The power adapter is not included in
the H4MIDI WC package, please purchase it separately if needed.
Please choose a power adapter with a positive terminal on the outside of
To Next Page
Loading...
