7/38
default state.
- The free HxMIDI Tools software can also be used to toggle the button
to send an "All Notes Off" message to all outputs for 16 MIDI channels,
eliminating unintentional hanging notes from external devices. Once
this function has been set up, you can quickly click the button while
the power is on.
USB-C client port and indicator
The H4MIDI WC has a USB-C port for connecting to a computer to
transmit MIDI data or connecting to a standard USB power supply (such as
a charger, power bank, computer USB socket, etc.) with a voltage of 5 volts
for standalone use.
- When used with a computer, directly connect the interface to the USB
port of the computer with the matching USB cable or through a USB
Hub to start using the interface. It is designed for plug-and-play, no
driver is required. The USB port of the computer can power H4MIDI
WC. This interface features 4-in-4-out USB virtual MIDI ports. H4MIDI
WC may be displayed as different device names on different operating
systems and versions, such as "H4MIDI WC" or "USB audio device",
with the port number 0/1/2/3 or 1/2/3/4, and the words IN/OUT.
MacOS
To Next Page
Loading...
