9 / 16
2. MIDI Mapper settings
MIDI Mapper is used to reassign (remap) the input data of the
connected and selected device so that it can be output according to
custom rules that are defined by you.
Note: Before you can use the MIDI Mapper function, the U6MIDI Pro’s
firmware must be updated to version 3.6 (or higher), and the UxMIDI Tools
software must be updated to version 3.9 (or higher).
Note: All Mapper settings will be automatically saved to the internal memory
of the U6MIDI Pro.
To Next Page
Loading...
Need help?
General