Specifications are subject to change without notice.
FAQ
⚫ The LED of the main adapter of WIDI Jack is not lit.
- Is the main adapter connected to the MIDI OUT jack of the MIDI device?
- Has the MIDI device been turned on?
- When using a USB power supply, please check whether the USB power is
turned on or whether the USB power bank has sufficient power (please
choose a power bank that can charge low-voltage devices)
⚫ WIDI Jack cannot receive or send MIDI messages.
- Try sliding the switch on the back of the WIDI Jack to adjust it to the TRS
MIDI mode that matches the polarity of the selected cable.
⚫ When I only use MIDI IN, can I only connect the optional cable of the WIDI
Jack to the MIDI IN socket of the device?
- Yes. But it needs to be connected to an external USB (5v) power supply or
power bank.
⚫ Can WIDI Jack connect wirelessly with other BLE MIDI devices?
- If the BLE MIDI device complies with the standard BLE MIDI specification,
it can be connected automatically. If the WIDI Jack cannot automatically
To Next Page
Loading...