CMI Health PC-66L User Manual (English)

Other manuals for CMI Health PC-66L

Questions and Answers:

Alexander JonesAug 5, 2025

What to do if my CMI Health PC-66L shows no signal?

J
Jason BlackAug 5, 2025
If your CMI Health Medical Equipment displays two dashes but shows a pulse plethysmogram, allow a few more seconds for numeric readings to appear. If there's no pulse plethysmogram, verify the sensor placement and integrity. Also, check the probe to see if the light source is blinking red; if not, the connection cord or sensor might have a broken circuit, requiring replacement or repair. Ensure the finger or foot is correctly placed in the sensor, or replace/secure the foot wrap. If the device still cannot detect signals, turn it off, securely place the finger or foot in the sensor, and turn it on again.

Brian Wright MDAug 15, 2025

Why does my CMI Health PC-66L keep showing 'Check probe!'?

I
ipaulAug 15, 2025
If your CMI Health Medical Equipment displays 'Check probe!', it could be due to a disconnected or broken cord, preventing signal detection, or the device malfunctioning. Check the probe for a blinking red light; if absent, the connection cord or sensor may be faulty and need replacement or repair. If the light is present, turn off the device, ensure the finger or foot is securely placed in the sensor, and turn it on again. If the issue persists, contact customer service.

Brand

Model

PC-66L