CMi 33 User Manual (English)

Questions and Answers:

V
Valerie HarrisJul 29, 2025
What to do if the CMi Tiller motor does not start?
- V
  Victoria WatkinsJul 29, 2025
  If the CMi Tiller motor isn't starting, several factors could be at play. First, ensure the plug has electricity by checking the line and fuse. A defective cable could also be the culprit, so inspect it thoroughly. The switch or switch/plug block might be faulty and require inspection. Disconnected connections to the motor or capacitor can also prevent starting, in that case have the machine checked by a customer service center. If the tiller is standing in high grass, try starting it on shorter grass or adjusting the aeration height. Lastly, a clogged aerator housing can obstruct the tine roller; clean the housing to allow unobstructed spinning.
E
Elizabeth LoveAug 8, 2025
Why does the CMi Tiller engine performance drop?
- D
  David JenningsAug 8, 2025
  If you notice the engine performance of your CMi Tiller dropping, it could be due to a few reasons. If the grass is too tall or damp, try adjusting the aeration height. Another cause might be a clogged aerator housing, so make sure to clean it thoroughly. Lastly, severely worn tines can also lead to performance drops, in that case replace the tine roller.
M
Michael RodriguezAug 19, 2025
How to fix imprecise aeration with CMi 33?
- R
  ramirezdanielAug 19, 2025
  Imprecise aeration with your CMi Tiller can stem from two main issues. Worn tines are a common cause, so consider replacing the tine roller. Also, the aeration height might be incorrect, so try adjusting it to the appropriate level.