58
*) The specified values are emission values and do not necessar-
ily represent safe workplace values. Although there is a corre-
lation between emission and immission levels, this cannot be
used to infer whether additional safety measures are necessary
or not. Factors which affect the current immission levels at the
workplace, include the type of room, other sources of noise,
e.g. the number of machines operating and other processes
taking place in the vicinity. Permitted workplace values can dif-
fer from country to country. This information is designed to help
the user to better assess the dangers and risks.
**) The specified vibration emission value was measured in
accordance with a normed test procedure and can be used in
order to compare one tool with another. The specified vibration
emission value can also be used for an introductory evaluation
of the exposure. The vibration emission value may fluctuate
from the specified value during actual use of the power tool.
These fluctuations will depend on the way in which the power
tool is used. Try to keep vibrations to a minimum. One method
of reducing the vibration load is, for example, limiting the length
of time you work with the tool. All parts of the operating cycle
must be taken into account for this purpose (for example, also
including times in which the power tool is switched off and
times in which it is switched on, but is running without load).
Appropriate chain oil
Use only special saw chain oils with good
adhesion properties. Since the saw chain oil
can penetrate the environment during opera-
tion, biologically-degradable special vegeta-
ble-based saw chain oils should be used.
Protection class II
Cutting speed 12m/s
Idling speed 7000min
-1
Cutting length 406mm (16")
Oil tank capacity 220ml
Noise pressure level
(L
PA
)*
85,9dB(A)
(K= 3dB(A))
Sound power level (L
WA
)* 105,9dB(A)
(K= 3dB(A))
Vibration** <8,393m/s²
(K= 1,5m/s²)
NOTICE! Risk of damage to the
device! Under no circumstances
should you use old oil to grease the
saw chain! This can cause damage to
the oil pump, saw rail and chain!
Item number 302 128
GB
Kettensaege_Elektro_302128.book Seite 58 Donnerstag, 5. Januar 2017 4:59 16
To Next Page
Loading...
Need help?
General
