Manual Beat Adjustment:
In cases where the swing of the Pendulum is restricted you will have to adjust the Anchor Lever
manually.
The Anchor Lever is attached to the shaft holding the Pallet. The two are held in position by a
friction bush. If the Pallet is held still, the Anchor Lever's position on the shaft can be adjusted
manually. The relationship between the Pallet and the Anchor will require many small adjustments
over an extended period of time. The adjustment is completed when the Anchor Lever swings
continuously and with an even beat.
Note: A correctly adjusted movement will run smoothly and continuously,
producing a balanced and familiar sound. Poorly adjusted movements
seldom run for very long and produce notably different sounds.
To Next Page
Loading...
General