14
Control Testing
Calibration Check – Allows the instructor to perform a
calibration check. (Test sequence: ACA)
Stability Test – Allows the instructor to perform a series of
calibration checks in succession to determine the instrument’s
accuracy and precision. The instrument prompts the user to
enter the number of calibration checks desired (minimum of
3) for the stability test. (Example: Test sequence for 5 checks
is ACACACACACA.)
Breath Test – Allows the instructor to perform a single breath
test. (Test sequence: ABA)
Diagnostics – Allows the instructor to perform a diagnostic
check. (Test sequence: AD)
Configuration
General Settings – Allows instructors to set the default
number of copies to print with each subject test.
Standard Change – Allows the instructors to change the
standard simulator solution in the Guth 12V500 simulator
used to perform the calibration checks on the I-9000.
To Next Page
Loading...
