CMi Intoxilyzer S-D2 - User Manual

S-D2
OPERATOR’S MANUAL
650132 Lev A

CMi Intoxilyzer S-D2 Specifications

General

Measurement Principle	Infrared Spectroscopy
Substance Measured	Ethanol (Alcohol)
Sample Type	Breath
Display	LCD
Accuracy	±0.005% BAC or ±5% of reading
Device Type	Breathalyzer
Printer	Internal thermal printer

Summary

Subject Breath Test Procedure

Operation Check List

Lists the sequence of steps required for a successful breath test operation.

Preliminary Test Precautions

Detailed Breath Test Procedure

Provides a comprehensive, step-by-step guide for performing a breath test.

Calibration Requirements: Dry Gas Standard

Alcohol Standards for Calibration

Dry Gas Standard Usage

Calibration Check Procedure

Calibration Check Checklist

Lists the steps required for performing a calibration check.

Detailed Calibration Check Steps

Provides step-by-step instructions for the calibration check process.

Calibration Adjustment

The Calibration Control

The Dry Gas Calibration Value

Calibration Adjustment Checklist

Lists the steps for performing a calibration adjustment.

Detailed Adjustment Procedure

Provides step-by-step instructions for adjusting the instrument's calibration.

Routine Field Service Checks

Battery Check and Replacement

Details how to check and replace the instrument's battery.

Sampling System Integrity Check

Describes how to verify the integrity and functionality of the sampling system.

Breath Sampling Light Function Test

Explains how to test the breath pressure switch and sampling lights.

Fuel Cell Reset Switch Test

Details the procedure for testing the fuel cell reset switch.

Fuel Cell Lifespan and Replacement