CMi Intoxilyzer S-D2 User Manual

10
INTOXILYZER
®
S-D2 Operator’s Manual
Press the ‘SET’
button until it
locks.
3) ATTACH MOUTHPIECE
Attach a mouthpiece to the sampling port on the top of the
S-D2. This sampling port forms the entrance to the fuel
cell and pressure switch and it is essential that the
mouthpiece is pushed fully onto it.
The subject must be offered the wide-bore, lipped end of
the mouthpiece to blow through. If the subject blows into
the other end, the pressure switch will not be activated
and the sampling lights will not operate. The instrument
Firmly
attach
a new
mouthpiece
to the
sampling
port.

CMi Intoxilyzer S-D2 Specifications

General

Brand	CMi
Model	Intoxilyzer S-D2
Category	Test Equipment
Language	English