CMi Intoxilyzer S-D2 User Manual

3
the instrument will generally be clear enough to receive
and analyze the second sample in less than two minutes.
INSTRUMENT FEATURES
1) Mouthpiece
This is attached to the sampling port. For
hygenic reasons, mouthpieces are supplied
separately packed and are disposable. A new
mouthpiece must be used for each breath test.
This minimizes health concerns and prevents
cross-sample alcohol contamination.
2) Sampling Port
This forms the entrance to the fuel cell detector.
When inserted into the small hole in the side of
the mouthpiece, it allows a small portion of
breath to be drawn into the instrument for
analysis.
3) ‘SET’ Button
This button forms part of the sampling system.
When fully depressed, the button locks to set
the instrument ready for sampling. When the
‘SET’ button rises, the sample to be analyzed
is drawn directly into the fuel cell detector.
4) ‘READ’ Button
This button has two functions:
1) to release the ‘SET’ button and take
the sample,
2) to switch on the amplifier and display
systems
INTOXILYZER
®
S-D2 Operator’s Manual

CMi Intoxilyzer S-D2 Specifications

General

Brand	CMi
Model	Intoxilyzer S-D2
Category	Test Equipment
Language	English