INTRODUCTION
The Intoxilyzer
®
S-D2
represents a well established
concept in breath alcohol
testing analysis. It is used
worldwide in law enforce-
ment, transportation and
workplace safety applications. The S-D2 is just
one of the range of instruments manufactured by
CMI, Inc. for these purposes.
The Intoxilyzer
®
S-D2 is accurate and reliable,
allowing a complete breath test procedure to be
conducted in about one minute.
This manual describes the operation,
maintenance, calibration check, and calibration
adjustment of the S-D2. This manual should be
read completely and fully understood by each
operator prior to testing a subject. It is further
recommended that operators practice the breath
testing process before giving an actual “in the
field” test.
The information contained in this manual concerning operational
procedures, protocols, accuracy verification schedules and
techniques is presented solely for the purpose of establishing a
general knowledge of the instrument and its operation. CMI
recognizes that many law enforcement customers have
agencies responsible for specifying instrument procedures,
protocols and techniques based upon their individual needs,
current laws and pre-existing administrative rules. Therefore, if
any such procedure, protocol, schedule or technique described
in this manual conflicts with the rules set forth by a recognized
governing agency, CMI defers to those authorized entities.
1
INTOXILYZER
®
S-D2 Operator’s Manual
To Next Page
Loading...
Need help?
General
