To Next PageTo Next Page
Need help?Do you have a question about the CNH Cursor 13 and is the answer not in the manual?
General| Displacement | 12.9 L |
|---|---|
| Fuel System | Common Rail |
| Bore x Stroke | 135 x 150 mm |
| Engine Type | Diesel |
| Torque | 2500 Nm |
| Cooling System | Liquid-cooled |
Provides essential safety and service guidelines for qualified personnel.
Explains safety alert symbols and their meanings for hazard communication.
Guidance on responsible use, disposal of chemicals, and battery recycling procedures.
Specifies minimum tightening torques for metric non-flanged hardware.
Torque specifications for metric flanged bolts and nuts.
Torque specifications for inch non-flanged bolts and nuts.
Torque specifications for inch flanged bolts and nuts.
Grade identification methods for inch all-metal lock nuts.
Essential shop procedures including shimming, seals, and spare parts.
Precautions for protecting electronic systems during charging and welding.
Importance and benefits of using specialized CNH repair tools.
Technical data and service procedures for the engine and crankcase.
Specifies acceptable wear limits and dimensions for engine components.
Step-by-step instructions for finding Top Dead Center (TDC).
Procedure for measuring cylinder liner wear and ovalization.
