GREAT BRITAIN • CUSTOMER SERVICE
tel 020 8247 9300 e-mail customerservice@clasohlson.co.uk internet www.clasohlson.co.uk postal 10 – 13 Market Place, Kingston Upon Thames, Surrey, KT1 1JZ
F
G
H
I
J
K
A B C D
L
E
M
Ver. 20180509
RGB Flexible LED Light Strip
Art.no 36-7237 Model LS-DT8800-3M
Please read theentire instruction manual before use and then save it for future
reference. We reserve theright for any errors in text or images and any necessary
changes made to technical data. In theevent of technical problems or other queries,
please contact our Customer.
Safety
Warning
• Neither theproduct nor its mains adapter may be dismantled or modified in any way.
• Never use theproduct if it, themains lead or themains adapter is in any way
damaged or malfunctioning. Unplug it immediately in case of injury.
• Do not use theproduct in explosive atmospheres or in thepresence of flammable
liquids or gases.
• Theproduct must only be connected to theincluded mains adapter.
• Never connect several or other types of devices to themains adapter.
• Themains lead must never be replaced. Theproduct must be discarded if it is
damaged in any way.
• Theproduct must not be installed on awet or electrically conductive surface.
• Make sure that thecables are not damaged whilst theproduct is being installed.
• Themains lead must not be crushed or damaged, protect it from sharp edges,
oil and heat.
• Always unplug theproduct from thewall outlet when it is not in use.
• Do not carry theproduct using themains lead and do not use it for other
incompatible purposes.
• Themains lead must not be shortened or cut.
Important
• Thebulbs cannot be replaced. When theLED strip has reached theend of its
service life, theentire product must be discarded.
• This product is designed exclusively for private use.
Product description
Remote control
A) [ ] Increase brightness
B) [
] Decrease brightness
C) [ OFF ]
D) [ ON ]
E) [ B ] Blue light
F) [ W ] White light
G) [ FLASH ] Light effect
H) [ STROBE ] Light effect
I) [ FADE ] Light effect
J) [ SMOOTH ] Light effect
K) Colour nuances
L) [ R ] Red light
M) [ G ] Green light
Risk for eye damage. Do not look directly at thelights/LEDs.
Theproduct is not suitable for household illumination.
This product is intended for indoor use only.
Class II mains adapter.
Class III string light.
Assembly
Information
TheLED strip can be mounted using double-sided adhesive tape. For best adhesion,
ensure that thesurface is clean, dry and free of grease.
1. If necessary, thelength of theLED
strip can be adjusted by cutting it at
one of themarkings (every 10cm
along thelength of thestrip).
2. Remove theprotective film from
thetape on theback of thelight
strip and attach it to thedesired
location.
3. Attach theLED control to thelight
strip.
4. Connect themains adapter to theLED control unit.
5. Plug themains adapter into awall socket.
Instructions for use
Information. Thelight strip will always turn on with thelast used setting.
1. Press [ ON ] (D) to turn thelight strip on.
2. Press [
] (A) to increase thelight intensity.
3. Press [
] (B) to decrease thelight intensity.
4. Press any of thebuttons to select thecolour of thelight.
5. [ R ] (L) = red.
6. [ G ] (M) = green.
7. [ B ] (E) = blue.
8. [ W ] (F) = white.
9. (K) = 12 nuances within theRGB spectrum.
10. Press any of thebuttons to select thelight effect.
11. [ FLASH ] (G): slowly changes between all thecolours (approx. 7 sec) without blending.
12. [ STROBE ] (H): changes quickly (approx. 2 sec) between all thecolours without blending.
13. [ FADE ] (I): changes between all thecolours and thecolours fade into one another.
14. [ SMOOTH ] (J): switch between all thecolours without visible blending.
15. Press [ OFF ] (C) to turn off thelight strip.
Care and maintenance
• Unplug themains lead from thewall socket before cleaning.
• Theproduct should be cleaned using adry cloth or vacuum cleaner, when necessary.
Responsible disposal
This symbol indicates that this product should not be disposed of with
general household waste. This applies throughout theentire EU. In order
to prevent any harm to theenvironment or health hazards caused by
incorrect waste disposal, theproduct must be handed in for recycling
so that thematerial can be disposed of in aresponsible manner. When
recycling theproduct, take it to your local collection facility or contact
theplace of purchase. They will ensure that theproduct is disposed of in
anenvironmentally sound manner.
Specifications
Note: Make sure there are
no obstacles between theLED
control unit’s IR receiver and
theremote control.
Mains adapter
Input 230 V AC, 50 Hz
Power 18 W
Output 12 V DC
Light strip
Size 3000×10 mm
Bulb 90×LED
Rated voltage 12 V DC
Rated power 18 W
Operating
temperature −20+60 °C
LED control unit
Rated voltage 12 V DC
Remote control
Range Max. 5 m
Battery 1×CR2025 (included)
To Next Page
Need help?
General