CO/Tech MDDG-20DEN3-QA3 - Air Filter

9
ENGLISH
Emptying the water reservoir
1. Unplug themains lead from thewall
socket.
2. Grip thewater reservoir by thehandles
(one on each side) and pull it forwards.
3. Empty thewater out of water reservoir
and then refit it onto thedehumidifier.
The dehumidifier will restart
automatically once thewater reservoir
has been refitted if it was shut off
automatically.
Automatic defrost feature
• The dehumidifier is equipped with anautomatic defrost feature. Frost can build up
on some components inside thedehumidifier under certain conditions. The defrost
feature removes this frost.
• The dehumidifier’s compressor will shut off when thedefrost feature is activated
and thefan continues to run until thefrost has disappeared.
• A purling sound might be heard from thedehumidifier during defrosting, this is normal.
• No settings can or need to be made for this feature.
Air filter
Disassembly
1. Remove thegrille and air filter from
theback of thedehumidifier.
2. Remove thefilter from thegrille.
Cleaning
1. Wash thefilter carefully in warm water, use amild detergent if necessary.
Note: Do not wash theair filter in adishwasher.
2. Rinse thefilter in clean water and let it dry before reinserting it.
Assembly
Fit theair filter back onto thegrille and then fit thegrille onto thedehumidifier.