EasyManuals Logo

Co2meter RAD-0102-6 Installation Guide

Co2meter RAD-0102-6
8 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Remote Storage Safety 3
Alarm Installation Guide
Model: RAD-0102-6
Product Description
Thank you for selecting the RAD-0102-6 Remote
Storage Safety 3 Alarm.
This monitor is designed to protect customers
and workers, anywhere bulk carbon dioxide is
used or stored.
Today, CO2 alarms are required in many local
state jurisdictions to meet fire codes. The RAD-
0102-6 is designed specifically to meet all code
requirements for CO2 storage safety. The
Remote Storage Safety 3 Alarm constantly
measures and monitors enclosed areas for higher
than normal levels of carbon dioxide gas.
If a CO2 leak occurs, visible and audible alarms
will sound on the sensor unit and on the remote
displayto warn you and your employees
.
The RAD-0102-6 Remote Storage Safety 3 Alarm is cost-effective and has
many features:
Separate SEU (Main Sensor Unit) and RDU (Remote Display Unit)
allow you to see warning before entering an enclosed area. Up to 3
RDUs can be used.
Large digital LCD display clearly indicates the ambient CO2
concentration.
Relay outputs to control ventilation devices.
Audible and Visual Alarm Indications at three separate alarm
levels.
Ability to add strobes or strobe towers for additional indication.

Other manuals for Co2meter RAD-0102-6

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Co2meter RAD-0102-6 and is the answer not in the manual?

Co2meter RAD-0102-6 Specifications

General IconGeneral
Target GasCarbon Dioxide (CO2)
Sensor TypeNon-dispersive infrared (NDIR)
Resolution1 ppm
Operating Temperature32°F to 122°F (0°C to 50°C)
Operating Humidity0 to 95% RH (non-condensing)
Power Supply5V DC via USB
OutputUSB
Weight2.5 oz
CompatibilityWindows
Measurement Range0 to 10, 000 ppm