Coachmen RV Cross Trail User Manual

Coachmen Cross Trail User Guide
V1 11-11-22
The Coachmen Cross Trail Ford Transit is equipped with Renogy REGO System which includes the
12.8V/400AH Lithium battery (2
nd
battery optional), 12V/60A DC-DC Bi-Directional battery charger from
alternator, 3000W Inverter Charger, and a 190W solar panel. The instructions will lay out the
components and how to operate and maintain them.
Must Read Before Operating
• These instructions are for reference only, please refer to the individual product manuals for
detailed instructions and data.
• Do not modify or alter the components in any way
• If issues exist, please refer to the individual product instruction manuals for more detail.
• For technical assistance please call DEHCO Inc, 1-800-621-2278
• For more information, please visit https://www.renogy.com
Operating Environment
The Renogy Lithium-Ion battery is designed for the following temperatures:
• Charge Temperature Range = -4°F to 122°F or -20°C to 50°C
• Discharge Temperature Range = -4°F to 140°F or -20°C to 60°C
• Storage Temperature Range = -4°F to 113°F or -20°C to 45°C
• Operation Relative Humidity = 5% to 95%

Coachmen RV Cross Trail Specifications

General

Manufacturer	Coachmen RV
Category	Motorhomes
Model	Cross Trail
Type	Class B
Awning	Yes
Sleeping Capacity	2
Fresh Water Capacity	20 gallons
Slide-Outs	No

Summary

Must Read Before Operating

Operating Environment

Turning Battery ON

Turning Battery OFF For Long Storage

Basic Usage

Renogy One All-in-One Monitoring Display

Details the Renogy One monitoring display showing key metrics like time, date, SOC, and components.

Getting Started

Recovery Process

Cold Weather Recovery

Changing Heater Settings

Instructions for enabling or disabling the battery heater using the power button.

Electrical Connections

Shore Settings

How to change to Lithium Battery type and settings

Procedure to configure inverter settings for lithium battery compatibility and charging.

How to Change Inverter Charge Current Parameter

Guide to adjust the inverter's AC charging current for optimal battery performance.

COMPONENT LOCATIONS

1) RIV1230RCL-1SS 12V/3000W Inverter Charger

Details the inverter charger's features including AC charge, remote switch, and Bluetooth.

3) RCC60REGO 12V/60A MPPT Charge Controller

Information on the MPPT charge controller's solar charge, PV input, and communication methods.

2) RBC1260DO-12B 12V/60A Bidirectional DC-DC Battery Charger

Overview of the DC-DC charger's capabilities, alternator charge, and battery activation.

4) REC400RSCB-4P System Combiner

Description of the system combiner box, its Anderson connectors, and fuse ratings.

Component Locations (Continued)

5) RMS-LP4 All-in-One Energy Monitoring

Details the monitoring system's capabilities for tracking battery, solar, and inverter data.

6) RIV1230RCL-1SS INVERTER ON/OFF BUTTON

Instructions for the inverter charger's ON/OFF remote switch for charging and power saving.

7) RBT12400LFPL-SHBT 12.8V/400AH Lithium Battery

Specifications of the 400Ah lithium battery, including stored power, discharge, and charging.

8) RSP200D-G1 200-WATT 12 VOLT MONOCRYSTALLINE SOLAR PANEL

Details on the 200W solar panel, including size, operating voltage, and current.

Inverter Faults

Common Issues

Highlights common fault causes such as low battery voltage, overload, and inverter settings.

Battery 101