How to fix no credit after coin in Coastal Amusements BLACK TIE?
If your Coastal Amusements Vending machine isn't registering credit after inserting a coin, verify that the Coins vs. Plays setting is configured correctly. If you are unable to adjust the Coins vs. Plays setting, there may be an issue with the main board, and it might need to be sent back for repair.
What to do if coins/tokens cannot be inserted into coin slot of Coastal Amusements BLACK TIE?
If you're having trouble inserting coins or tokens into the coin slot of your Coastal Amusements Vending machine, here are a few things to check: * Examine the sample coin at the coin mechanism. * Adjust the coin mechanism's sensitivity. * Confirm that there is DC12V input to coin mech. * The coin mechanism may be broken. * Adjust the coin mech data based on manual.
Why Coastal Amusements Vending machines don’t move forward or backward by joystick operation?
If the joystick on your Coastal Amusements Vending machine isn't moving the claw forward or backward, consider the following checks: 1. See whether the forward/back motor fuse (FB) on the fuse board has blown. 2. Ensure that the J5 connecting pin of the PCB is securely connected. 3. Verify the positions of the stop-front SW (Gantry & Assembly I No. 22) and back-stop SW (Gantry & Assembly I No. 23), and confirm their wiring is intact. 4. Inspect the Front/Back motor for functionality and proper wire connections; also, check the shaft pinion's position. 5. Check if J9 connecting pin of P.C.B. is properly connected. 6. Make sure all gantry connecting pins are correctly connected to the machine.
Why Coastal Amusements BLACK TIE Vending machines don’t move to left or right by joystick operation?
If your Coastal Amusements Vending machine isn't moving left or right when using the joystick, try these troubleshooting steps: * Check the left/right motor fuse (LR) on the fuse board to see if it's burned out. * Check if the left and/or right SW is out of function or if their wires are properly connected. * Ensure that the J5 connecting pin of the PCB is properly connected. * Verify the position of the stop-left SW (Gantry & Assembly I No. 21). * Check the Left/Right motor for proper function and wiring; also, verify the position of its shaft pinion. * Check if J9 connecting pin of P.C.B. is properly connected. * Make sure all connecting pins of the gantry are properly connected to the machine.
What to do if Coastal Amusements Vending machine doesn’t lower down, but the Descend button is in normal condition?
If your Coastal Amusements Vending machine isn't lowering down, even though the Descend button seems to be working, make sure the Up/Down motor wires are properly connected. Check if the Up/Down motor is functioning correctly and that its shaft pinion is in the correct position. Also, verify that the J9 connecting pin of the PCB is properly connected. It's also possible that the main board has broken down.
Why Coastal Amusements Vending machine don’t return to its home position?
If your Coastal Amusements Vending machine isn't returning to its home position, try these steps. If after powering the machine off and on, the gantry still doesn't return to its home position, check that the stop-back SW (Gantry & Assembly I No. 23) or stop-left SW (Gantry & Assembly I No. 21) are in the correct positions and that their connecting wires are properly connected. Also, check that the air-plug of the gantry set connects well. If problems persist, the PCB may be out of service.
What to do if Coastal Amusements Vending machine doesn’t lower down or only down a bit and close up in the air then it returns to its home position?
If your Coastal Amusements Vending machine only lowers a bit, closes in the air, and then returns to its home position, check to see if the winding cord is stuck. Also, check if the stop-down SW is functioning properly.
Why Coastal Amusements Vending machine don’t fully lower down?
If your Coastal Amusements Vending machine isn't lowering down completely, check if the winding cord is the correct length and isn't stuck. Also, verify that the stop-down SW is working as it should.
What to do if Coastal Amusements Vending machine don’t lower down by Descend button operation, but only until time’s up?
If your Coastal Amusements Vending machine only lowers when the 'Descend' button is pressed until the time runs out, first check if the 'Descend' button is working correctly. Then, check if the connecting wires of the 'Descend' button are properly connected. Finally, check if the J5 connecting pin of the P.C.B. is properly connected.
How to fix claw open after hitting upper-stop switch in Coastal Amusements BLACK TIE?
If the claw of your Coastal Amusements Vending machine opens after hitting the upper-stop switch, you should adjust VR2 higher according to the dimensions and weight of the objects.
General| Brand | Coastal Amusements |
|---|---|
| Model | BLACK TIE |
| Category | Vending machines |
| Language | English |
To Next Page